17

With the help of the Wavlink AC1200 dual band extender, you quickly boot the range of the router’s WiFi signal. The installation process of the Wavlink extender is straightforward. To know or get a brief knowledge about the Wavlink AC1200 extender device read this entire page carefully.

AC1200 Extender Overview

WPS Button: At the front of the Wavlink AC1200 device you see the WPS button, which is used to pair the extender to the router.

Reset Button: Push and hold the reset button, to reset all the extender settings.

Wavlink AC1200 Dual Band Extender Benefits

• Increase the range of router WiFi signals.
• It supports dual frequency bands 2.4GHz and 5GHz.
• Compatible with any type of existing router.
• The login and setup process is straightforward.
• Wavlink AC1200 dual band extender is easy to handle or carry at any place, due to its small size.

AC1200 Extender LEDs Mean

• The device is activated if the gadget shows a solid pink LED.
• The internet is not connected if the extender fast flashes a red LED.
• Internet is linked but not accessible if the Wavlink AC1200 extender slowly flashes the red LED.
• The internet connection is so bad if the RED LED is stable.

Navigate Dual AC1200 Extender Login Page

• First, place the power plug of the AC1200 dual-band WiFi range extender in a power socket.
• After that, take the computer and connect it to the extender network.
• Now, open the web browser on your computer and enter wifi.wavlink.com default web portal in the HTML bar.
• After that, the Wavlink AC1200 extender login page opens on your display.
• Fill in all the details shown on the display page and tap on the login button.
• Hence, doing the above steps the Wavlink extender login process is completely done now.

Why Login Page Not Open After Entering Wifi.wavlink.com

• Your laptop or PC is not set to obtain an IP address automatically.
• The extender and computer are not linked to each other.
• The web browser of your Wi-Fi-containing device is outdated.

AC1200 Dual Band Extender Setup

There are two options to do the setup process,

Option 1: Via Default Web Portal

• Initially, in the power socket place the power plug of the Wavlink AC1200 extender.
• After that, make a connection between the extender and the computer.
• Now, on your computer go to a web browser and visit the URL and type default IP or web portal.
• Next, pick the language and make a new login password by considering the directions.
• Further, pick up the repeater mode selection, and then you can pick the upstream router either automatically, or manually.
• In the end, pick the AP mode, you can either keep the old SSID or make a new one, and then according to the rules you can set up the network.

Option 2: WiFi Protected Setup Method

• Initially, settle the AC1200 extender in an electrical socket, near the router.
• After that, push the WPS button on the extender and router.
• Further pushing the WPS button the solid WPS LED starts blinking solid on the extender and router gadget.
• Thus, the AC1200 dual band extender and main router are both linked with each other.

After doing the Wavlink AC1200 setup, if you are facing any common issues then try the below solutions tips to fix them.

Wavlink AC1200 Issue Resolving Tips

Change AC1200 Extender Placement

Most of the time you can face issues with your extender when the placement of the extender is improper. We recommend you place or settle your extender at the central location of your office and house. Make sure when you locate your extender at the central location, near the extender device no metal appliances should be placed.

Enhance AC1200 Dual-Band Extender

• To upgrade the Wavlink extender software you will need to visit the web management page.
• After that, fill in the details shown on the web management page.
• Next, tap on the administration option and then hit on the software upgradation option.
• Now, if you see the latest software file then install it on your laptop or computer.
• After installing, you will need to restart your extender to finish the software upgrade process.

Power Cycle Wavlink Extender

• First, turn off the extender and take out the power plug of the extender from the power socket.
• After that, wait for a short while and give some rest to the extender and router.
• In the end, put the power plug of the extender back into the wall socket and turned it on.

Reset Wavlink AC1200 Dual Band Extender

• At the side of the Wavlink AC1200 extender, you can see the reset hole button.
• Now, push the reset button by taking a paperclip.
• Next, the LEDs of the AC1200 dual extender will turn off
• Therefore, the extender device is now reset completely.

Tip: In your house or office if you are having the other model number of Wavlink extender, for example, AC600 and you are looking for the configuration information then don’t worry simply visit the Wavlink AC600 setup page and follow all the directions carefully. After the entire study of this page, you will be able to do the login and setup process by yourself, without grabbing help from any technician experts. In case after the setup you are facing a connection issue or any other issue then you can easily fix it by trying the above solutions.